Why Is Your Nothing Phone Charging Slowly or Randomly Stopping, and How Can a GaN Charger Help?
Nothing phones have carved out a unique niche among Android enthusiasts, combining minimalist design with solid performance. The Nothing Phone (1), Phone (2), and the budget-friendly Phone (2a) have gained significant traction for their transparent aesthetic and clean software experience. However, many users report frustrating charging issues that seem to plague these devices.
The Common Charging Complaints
If you browse Reddit threads about Nothing phones, you’ll find countless posts about charging problems. Users frequently complain about:
- Slow charging speeds that don’t match advertised specifications
- Inconsistent charging that stops randomly mid-charge
- Failure to trigger “Fast Charging” mode even with compatible adapters
- Overheating during charging that forces the phone to throttle
Each Nothing phone model has different charging requirements. The Phone (1) supports 33W charging, the Phone (2) can handle up to 45W, while the Phone (2a) maxes out at 45W as well. These specifications matter more than you might think.
Could the Issue Be Your Charger, Not Your Phone?
Before assuming your Nothing phone is defective, consider this: the problem might be your charging setup, not the device itself.
Is It a Fault in the Cable or the Adapter?
USB-C cables aren’t all created equal. Many users don’t realize that their cable might be the bottleneck. Here’s what affects charging performance:
- Power Delivery (PD) compatibility – Not all USB-C cables support PD protocols
- Current limits – Cheap cables often have lower amperage ratings
- Wear and tear – Frequent bending and unplugging degrades internal connections
Reddit users frequently report that switching to a high-quality USB-C cable resolved their charging issues. Substandard or old cables create resistance that affects current flow, leading to slower charging speeds and random disconnections.
Could It Be Software or Battery Health?
Overheating has become a major issue with modern smartphones, and Nothing phones are not immune. When your phone gets too hot during charging, it automatically reduces charging speed or stops entirely as a safety measure. This is actually more common than people realize.
Additionally, battery health degradation affects charging behavior. After 12-18 months of use, lithium-ion batteries lose capacity and may require recalibration. Users on r/NothingTech frequently discuss how battery calibration issues cause erratic charging patterns.
Does the Power Source Matter?
Absolutely. Many charging problems stem from inconsistent power sources:
- Voltage fluctuations from wall outlets affect charging stability
- Extension cords can cause voltage drops
- Low-quality power strips may not deliver consistent current
When your Nothing phone detects unstable voltage, it triggers safety cut-offs to protect the battery. This explains why your phone might charge fine in one location but struggle in another.
How Do Modern Charging Standards Affect the Nothing Phone?
What Is USB Power Delivery (PD) and Programmable Power Supply?
USB Power Delivery (PD) is the modern standard that allows devices to negotiate optimal charging parameters. Programmable Power Supply (PPS) is an extension of PD that provides even more precise voltage and current control.
| Here’s the crucial part: Nothing phones, especially the Phone (1), Phone (2), and Phone (2a), rely heavily on PPS for optimal charging performance. Without PPS support, your phone falls back to slower charging modes. |
Why Do Some Chargers Fail to Activate “Fast Charging”?
The “fast charging” handshake between your phone and charger is surprisingly complex. Mismatched voltage/current profiles can prevent this negotiation from succeeding.
For example, if you’re using an 18W charger or a non-PD GaN charger, your Nothing phone might only charge at 10-15W instead of its maximum capacity. Through the regular discussions by Nothing users, it is evident that they consistently report this issue when using older or incompatible chargers.
What Makes GaN Chargers Different from Traditional Ones?
What Exactly Is GaN Technology?
Gallium Nitride (GaN) technology represents a significant leap from traditional silicon-based chargers. GaN semiconductors can handle higher voltages and frequencies while generating less heat. This translates to:
- Smaller physical size without sacrificing power output
- Better efficiency (more than 95% vs 80-85% for silicon)
- Lower heat generation during operation
How Does a 65W GaN Charger Improve the Charging Experience?
A quality 65W GaN charger provides several advantages for Nothing phone users:
- Adaptive power delivery with full PPS support ensures stable charging
- Reduced heat generation prevents thermal throttling
- Better conversion efficiency means more power reaches your device
- Improved battery longevity through consistent, clean power delivery
Can a MoGaNCharge 65 Fix Nothing Phone Charging Problems?
Does MoGaNCharge 65 Support PPS and Power Delivery?
The MoGaNCharge 65 features comprehensive PPS support with a voltage range of 3.3V–21V up to 3.25A. This profile is specifically designed for modern devices like Nothing phones, ensuring optimal compatibility with Phone (1), Phone (2), and Phone (2a) models.
The charger also supports laptops and tablets, making it a versatile solution for multiple devices.
How Is It Different from Regular 65W Chargers?
Compared to traditional silicon chargers, the MoGaNCharge 65 offers:
- Superior power efficiency – More power delivered, fewer losses as heat
- Advanced temperature control – No thermal throttling during extended use
- Multiple port versatility – USB-C ports with comprehensive safety protocols
- Compact design – Significantly smaller than equivalent silicon chargers
How to Know If You’re Using the Right Charger for Your Nothing Model
Refer to the table below, and try to figure out how different models of Nothing need different power requirements. In that case with an intelligent power supply, you can ensure that the device’s battery health won’t be compromised.
| Model | Fast Charging | Wireless Charging |
| Phone (1) | Up to 45W | Yes |
| Phone (2) | Up to 45W | Yes |
| Phone (2a) | Up to 45W | No (based on specs) |
| Phone (2a) Plus | Up to 50W | No (based on specs) |
| Phone (3) | Up to 65W | No (based on specs) |
What Should You Check Before Plugging In?
Before purchasing any charger, verify these specifications:
- PPS voltage range – Look for USB-PD 3.0+PPS certification on the packaging
- Power output – Ensure it matches or exceeds your phone’s maximum charging speed
- Quality certifications – Check for standards like QC4+ or USB-IF certification
Rather than trusting blind items, you can always go ahead and check the specifications. It’s always better than trusting marketing gimmicks.
Can Using a GaN Charger Extend Battery Life?
Yes, consistent current delivery reduces battery strain over time. When your phone receives stable, clean power, the battery doesn’t have to work as hard to accept the charge. Community feedback on platforms like Reddit consistently shows that users who switch to quality GaN chargers experience:
- More consistent charging speeds
- Reduced overheating issues
- Better long-term battery health
Common Myths About GaN Chargers
“GaN Chargers Overheat Easily“
This is completely false. GaN technology actually runs cooler than silicon alternatives due to higher efficiency. Less energy is wasted as heat, resulting in lower operating temperatures.
“They’re Unsafe for Phones“
Modern GaN chargers include comprehensive safety features:
- Over-Current Protection (OCP)
- Over-Temperature Protection (OTP)
- Over-Voltage Protection (OVP)
These safeguards make GaN chargers safer than many traditional alternatives.
Final Thoughts: Should You Switch to a GaN Charger for Your Nothing Phone?
If you’re experiencing charging issues with your Nothing phone, a quality GaN charger like the MoGaNCharge 65 could be the solution. The combination of PPS support, superior efficiency, and advanced safety features addresses most common charging problems.
The benefits extend beyond just faster charging – you’ll get better compatibility, improved device longevity, and a more reliable charging experience overall. It’s time to move away from outdated adapters and embrace modern charging technology.
Don’t forget to share your thoughts with us, and check out our product at Amazon Prime!
FAQ
Why is my Nothing Phone not showing fast charging?
Your charger may lack PPS support or have incompatible voltage/current profiles. Check for USB-PD 3.0+PPS certification.
Can a 65W GaN charger damage my Nothing Phone?
No, modern phones have built-in charging controllers that only draw the power they need. Safety protocols prevent damage.
How does MoGaNCharge 65 differ from regular chargers?
It offers PPS support, higher efficiency, better temperature control, and comprehensive safety features in a compact design.
Is PPS support really necessary for fast charging?
For Nothing phones, yes. PPS enables optimal charging speeds and prevents the common issues users report.
Does using a third-party charger void warranty?
No, using certified third-party chargers doesn’t void warranty, but always choose reputable brands with proper certifications.
